KTC M27P6 Gaming Monitor Help: Set Up, Connect, Use KVM, and Fix Common Problems

User manuals

Product firmware

USA-1.0.8 Download

Note: Damage or malfunction resulting from failure to follow the official firmware update instructions may not be covered under KTC's warranty, repair, or replacement policy.

Use this guide when you are setting up a KTC M27P6 gaming monitor, connecting HDMI, DisplayPort, or Type-C video, using USB and KVM, mounting it on a wall or monitor arm, or fixing common problems.

Quick Answers for Common KTC M27P6 Questions

The M27P6 is a 27-inch gaming monitor with dual display modes, KVM support, USB data ports, and Type-C video input.

Use 3840 x 2160 @ 160Hz for the native 4K mode.
Use 1920 x 1080 @ 320Hz when you want the high-refresh dual-mode setting.
Start with 1920 x 1080 @ 60Hz if the screen is black or unstable.
Connect video through HDMI 1, HDMI 2, DP, or Type-C.
Use USB-UP or Type-C for the upstream USB/KVM path.
Use the joystick shortcuts: Up for input source, Down for brightness, Left for gaming assistance, and Right for KVM.
Use the 100 mm x 100 mm wall-mount pattern if you plan to mount the monitor.
Normal operation power consumption is listed as up to 240W; standby is listed as up to 0.5W.

What Should I Know Before Setting Up the Monitor?

Use the included adapter, or one that matches DC 24V / 10A.
Place the monitor face down only on a clean, soft, flat surface.
Keep the screen protected while attaching the base.
For the first video test, use one direct HDMI, DP, or Type-C cable.
Add docks, adapters, KVM switches, hubs, splitters, or extension cables only after the monitor is working normally.
For Type-C video, confirm the source Type-C port supports display output.

What Comes in the KTC M27P6 Box?

Check the package before setup.

LCD monitor x1
Base x1
Power adapter x1
Power cord x1
Type-C signal cable x1
DP signal cable x1
User guide including warranty card x1

If something is missing, contact KTC support or the seller. Please include your order details, model number, package condition, and a photo of what you received.

How Do I Install the Monitor Base?

Use this section if you are searching for how to assemble the M27P6 setup correctly before first use.

Lay the monitor face down on a clean, soft, flat surface.
Attach the base and stand following the original manual diagram.
Confirm the mounting lock before lifting the monitor.
Lift the monitor by the body and stand area, not by the screen edge.
Place it on a stable, level desk before connecting cables.

Where Should I Put the Monitor for Better Airflow?

Use this section if you want to know how much space the M27P6 needs or how to keep the display from getting too hot.

Leave at least 4 inches (10 cm) of open space around the left, right, and rear sides.
Leave about 12 inches (30 cm) above the monitor when possible.
Leave about 3 inches (7 cm) of lower rear clearance when the monitor is installed on its base.
Do not cover ventilation openings or insert anything into the shell.
Keep the monitor away from heat, direct sunlight, humidity, insects, strong vibration, and strong electromagnetic interference.

How Do I Connect Power to the KTC M27P6?

Use this section if the M27P6 will not turn on, you are checking the correct adapter, or you are setting it up for the first time.

Check that the adapter label matches DC 24V / 10A.
Connect the adapter DC plug to the monitor DC input.
Connect the power cord to the adapter.
Plug the power cord into a grounded wall outlet.
Keep the adapter and cable away from liquid, sharp bends, and heavy pressure.

When unplugging, hold the plug instead of pulling the cable.

How Do I Connect HDMI, DisplayPort, or Type-C Video?

Use this section if you are searching for how to connect the M27P6 to a PC, laptop, console, or other video source.

Choose the cable that matches your source device and monitor input.
Connect the cable from the source output port to the matching monitor input.
For the first test, use one direct cable.
Turn on your source device and the monitor.
If no image appears, open the input/source menu and choose the port you used.

The rear interface labels in the original manual show HDMI 1, HDMI 2, DP, Type-C, USB-UP, two USB data ports, headphone output, and DC power input.

How Do I Use Type-C Video on the M27P6?

Use this section if you want to connect a laptop or external device through Type-C.

Use a full-function Type-C cable that supports video transmission.
Connect the computer or compatible device to the monitor Type-C input.
Select Type-C as the input source.
If no image appears, confirm that the source Type-C port supports display output.
Test from 1920 x 1080 @ 60Hz, then raise settings after the image appears.

How Do I Use USB Upstream and KVM on the M27P6?

Use this section if you want USB devices, KVM switching, or USB data functions to work correctly on the M27P6.

Connect video by HDMI, DP, or Type-C first.
Connect a USB upstream cable from monitor USB-UP to the computer, or use the monitor Type-C connection as the upstream path when supported.
Connect keyboard, mouse, or other USB devices to the monitor USB data ports.
Use the joystick KVM shortcut or OSD KVM item to switch the active USB upstream path.
If USB devices do not follow the video source, confirm that the KVM path matches the current input source.

How Do I Use Headphones or External Speakers with the Monitor?

Use this section if your headphones or speakers are connected but there is no sound, or if you want audio to pass through the monitor.

Connect headphones or external speakers to the monitor audio output port.
Use an input source that carries audio.
If there is no sound, check the source-device audio output, monitor volume, and app volume.

How Do I Turn the KTC M27P6 On or Off?

Use this section if you are looking for the power button or the correct steps to turn the M27P6 on or off.

Press the joystick/power key once to turn on the monitor.
Wait for the logo, no-signal screen, or your device image.
To turn it off, press and hold the joystick/power key for about 3 seconds.
If you will not use the monitor for a long time, turn it off and unplug the power cord.

How Do I Use the Joystick Menu?

Use this section if you need to navigate the monitor menu, switch inputs, or use monitor shortcuts.

Joystick direction	Shortcut before opening the menu	Action inside the menu
Up	Input source	Move up
Down	Brightness	Move down
Left	Game assistance	Go back or exit
Right	KVM	Open, select, or confirm
Press	Power on or open menu	Confirm option

Press and hold the joystick for about 3 seconds to turn off the display.

How Do I Choose the Input Source on the M27P6?

Use this section if you want to switch between HDMI, DisplayPort, and Type-C on the KTC M27P6.

Move the joystick Up to open input source selection, or open the main menu first.
Highlight the input that matches your cable, such as HDMI 1, HDMI 2, DP, or Type-C.
Confirm the selection.
Wait a few seconds for the picture to appear.

If the wrong source is still active, reconnect the cable directly and choose the same input again.

How Do I Set Resolution and Refresh Rate?

Use this section if the image looks blurry, the refresh rate option is missing, or you want the best resolution and refresh-rate setting.

Open display settings on your PC, console, or graphics control panel.
Select the KTC M27P6.
Choose 3840 x 2160 or 1920 x 1080 based on the mode you want to use.
Start at 1920 x 1080 @ 60Hz if there is no image or the image is unstable.
Use up to 160Hz at 4K, or up to 320Hz at 1080p, only when the source, cable, port, and system support it.
If the screen turns black, reconnect at 1920 x 1080 @ 60Hz, then increase settings gradually.

How Do I Adjust the Screen Position?

Hold the monitor body and stand with both hands.
Rotate the screen up to 90 degrees for portrait use if needed.
Swivel left or right up to 45 degrees.
Tilt the screen from -5 degrees to 20 degrees.
Adjust height up to 130 mm.
Keep cables loose enough after adjustment.

How Do I Mount the M27P6 Monitor on a Wall or Monitor Arm?

Use this section if you are searching for how to mount a monitor on a wall, how to attach a monitor arm, or what VESA size the KTC M27P6 uses.

Turn the monitor off and unplug all cables.
Remove the stand according to the original manual.
Use a wall mount compatible with 100 mm x 100 mm.
Use suitable mounting screws such as M4 x 10 mm where required by the bracket setup.
If you are not sure whether the wall or bracket is suitable, ask a qualified installer.

How Do I Clean and Store the Monitor Safely?

Use this section if the screen has dust, fingerprints, or smudges, or if you need to store the product safely.

Turn off and unplug the monitor before cleaning.
Wipe the screen gently with a soft, slightly damp cloth.
Do not spray liquid directly onto the panel.
Do not use hard objects or strong solvents.
Store it in a dry, ventilated place away from humidity, temperature extremes, sunlight, and pressure on the panel.

Troubleshooting KTC M27P6 Gaming Monitor Problems

Why Won't My KTC M27P6 Monitor Turn On?

Confirm the wall outlet works.
Reconnect power to the monitor.
Check that the adapter matches DC 24V / 10A.
Press the power key once and wait 10 seconds.
If the power light still stays off, contact support with the adapter label and power-light status.

Why Is the Power Light On but the Screen Is Black?

Press the joystick/menu key and check whether the on-screen menu appears.
If the menu appears, choose the input source that matches the cable.
Reconnect the signal cable at both ends.
Use one direct cable and test 1920 x 1080 @ 60Hz.
After the picture appears, raise the resolution and refresh rate gradually.

Type-C Shows No Image

Confirm the cable supports video transmission.
Confirm the source Type-C port supports display output.
Select Type-C as the monitor input.
Test at 1920 x 1080 @ 60Hz.

USB Devices Do Not Follow the Input

Confirm the USB-UP or Type-C upstream connection is active.
Check the KVM setting in the joystick shortcut or OSD.
Reconnect the keyboard, mouse, or USB device after selecting the correct path.

Why Does the Image Look Blurry, Stretched, or the Wrong Size?

Choose a resolution supported by the source device and selected input.
Check scaling settings on the source device.
Use auto adjust only if the current input supports it; for HDMI, DP, or Type-C, prioritize the source-device settings.